CV 200 lineCV 2x2
Control valves
NPS 1 to 6, Class 150, Class 300
CV 200 line
CV 2x2
Control valves
NPS 1 to 6, Class 150, Class 300
Description
Control valves CV 2x2 are single-seated valves with pressure-balanced plug designed for regulation of process medium flow. This execution enables the valves to be assembled even with low-linear-force actuators. Flow
characteristics, Kvs values and leakage rates correspond to international standards.
Valves CV 2x2 are especially designed for electromechanic and pneumatic actuators of the following producers: Auma, Schiebel, Rotork and EMG - Drehmo, Auma,
Schiebel, Rotork a EMG - Drehmo, Honeywell, Fisher - Rosemount and SPA Praha.
Application
These valves have a wide range of application in heating, ventilation, power generation and chemical processing industries. Valve body can be optionally made of cast steel, cast CrMoV steel and stainless steel.
Process media
Valves series CV 2x2 are designed for regulation of flow and pressure of liquids, gases, vapours and other media compatible with material of the valve inner parts. To ensure reliable regulation, producer recommends to pipe a
strainer in front of the valve into pipeline or ensure the process medium to be without any abrasive additions or impurities.
Technical data
Series |
CV 222 |
CV 232 |
||
| Type of valve | Two-way, single-seated control valve with pressure-balanced plug |
|||
| Nominal size range | NPS 1 to 6 | |||
| Nominal pressure | Class 150, Class 300 | |||
| Body material | Cast steel A216 GradeWCB |
Cast CrMoV steel A217 GradeWC6 |
Stainless steel A351 GradeCF8M |
|
| Operating temperature range | -20 to 260oC | |||
| Face to face dimensions | EN 558-2 series 37, 38 | |||
| Connection flanges | ANSI/ASME B16.5 | |||
| Flange faces | ANSI/ASME B16.5 - RF (raised face) ANSI/ASME B16.5 - RTJ (ring type joint) |
|||
| Type of plug | V - ported, perforated | |||
| Flow characteristic | Linear, equal-percentage, LDMspline®, parabolic | |||
| Kvs values | 4,0 to 360 m3/hour | |||
| Seat leakage | ANSI/FCI 70-2-1991 Control valves with metal - metal seat sealing: Class III Control valves with metal - PTFE seat sealing: Class IV |
|||
| Rangeability r | 50 : 1 | |||
| Packing | O - ring EPDM tmax=140oC DRSpack® tmax=260oC Bellows tmax=550oC |
|||
| Name |
Catal. No. / version |
Format and size |
| LDM valves acc.to ANSI/ASME B16.5 with electromechanic actuators |
01-10.1 / 04.03.GB |
(*.pdf, 382 kB) Download |
| LDM valves acc.to ANSI/ASME B16.5 with pneumatic actuators |
01-10.2 / 04.03.GB |
(*.pdf, 395 kB) Download |
